Author: admin (page 1 of 3)

Android Beyond Mobile Phones

Hardly a day goes by without the arrival of a new Android phone commercial or rumors emerging about Googles next innovation. Android is here, you know it. It is attracting the best application developers, assembling the largest collection of ODMs, recruiting leading software and semiconductor vendors (aka the Open Handset Alliance and Open Embedded Software Foundation), and thus becoming “the buzz” everywhere.

Google’s Android operating system may have been created for phones and refined for tablets, but the OS is certainly set to move beyond the bounds of mobile devices. Recently we have witnessed Google announcing a new class of Android devices for the home at its annual I/O developer’s conference. With this move, Google presented its next strategic direction for the Android OS: “taking over our homes”. The Android@Home project is all about extending the Android OS to discover, connect, and communicate with devices in the home. Google signals the whole ecosystem of hardware makers, software developers, designers, content providers etc. where future business opportunities are emerging.

Android is already invading e-readers, media players, netbooks, GPS systems, Internet tablets, digital photo frames, VoIP phones, set-top boxes and more. It may seem as a small portion of the market, but front runners are setting the path for Android advancing in segments such as point of service, industrial controls/automation, automotive infotainment, utility monitoring, home automation/security and more beyond.
While developing new devices we must be aware that massiveness and complexity of the embedded software is rapidly progressing, rising the development cost accordingly. It is said that more than 60% of the average embedded system development cost is on the software development account. Traditionally, equipment makers developed embedded software on their own; however, in order to reduce development period and development costs, nowadays it is necessary to effectively use standard components such as standard OS and package software.

Under the veil of cutting costs, most of the manufacturers concentrate on implementing faster instead on differentiating better. Do you really want to make a product that follows other similar successful products into a market rather than setting a trend? Are the me-too products good enough for you?

New concepts that will speed time-to-market and cut costs for development are becoming extremely popular in the software development world. I like to call it reduced cost-to-market strategy. Applied in the Android field of interest, where Android is the platform for the system, this approach promotes standardization of common framework and platform for various devices and systems other than cellular phones and fast launch on the market.

All parties in the Android ecosystem need to join forces to focus and work together on co-development of common frameworks and platform for various devices beyond cellular phones to expand Android as the platform of embedded systems. By doing so, each player empowers themselves with the leverage on the market with the good starting point in the platform that will turn into successful products on the market. A nice starting point is to set the basis and work on optimization and standardization of the core platform, which will definitely lead to development of products and applications that will differentiate brands on the market.

For this very reason, here at Seavus we pride ourselves to contribute to the open source community and be among the front runners in the Android development. On the other hand we always strive to differentiate by creating the ultimate customer experience. These two facts are our stepping stone for the next adventure path-lining our strategic goal of embedding Android platform into more mature technologies and systems. Seavus has joined OESF and strategically invests in spreading the Android soul in Europe.
Android will soon run through the veins of each home appliance and personal gadget. The same familiar home-screen will await you on your refrigerator, while taking the first morning cup of coffee, chatting with your friends or reading the latest tweets. To envisions change, to be the first to provide new soul to home appliances of the future you need your full and undivided focus on the product. Together we can make it happen.

A Cheaper iPhone Rumor or Reality

Ever since Apple Inc. developed and released the first iPhone in June of 2007, the California-based technology giant has been at the cutting edge of advances in smartphone technology. If Apple isn’t actually driving the vehicle of change and creativity in the industry, the fear that they’ll come out with something bigger and better drives others to try and innovate as quickly and effectively as Apple. That Apple remained at the top of the industry for as long as it did was no small feat. While competing Android devices were available in several models from various manufacturers (Samsung, HTC, LG), the iPhone is the only Apple iOS powered smartphone available. As of the end of 2012, Android had finally established itself firmly in the driver seat in the industry by capturing 75% of the mobile market compared to a dwindling 20% for Apple’s iOS.

Diversity alone was not the entire reason behind Apple’s fall from the top. The iPhone isn’t exactly priced competitively, in part because Apple knows that hardcore iPhone fans will come back again and again for new generations of the device. Each new generation iPhone is priced at $199 with a two-year contract on various carriers and stays at that lofty price until a new generation comes out.

Android devices on the other hand generally cost between $0 and $99 with a new contract and deals are frequently offered to get top models for half their starting price, particularly around the holidays. These aren’t subpar devices either. Many of them match or exceed the hardware specifications and performance of each iPhone.

Now it is rumored that Apple is considering the production of a new, cheaper iPhone to try and recapture some of the market. Rather than the metal, glass, and/or aluminum enclosures that iPhone users have been accustomed to from the beginning, the new device is rumored to be constructed out of a plastic body. Reports vary on the subject with some sources stating an all plastic casing would be used, while others say it is more likely this new handset would be a combination of metal and see-through plastic.

Apple would be able to offer the device at a lower price than it typically sets for iPhones for two reasons. The switch to plastic is not only a cheaper alternative to metal and glass casings, but the move would also allow the company to use U.S. based suppliers to secure the parts and manufacture the phones at home.

Whatever the case, it would mark the first time that Apple has developed different models within the iPhone lineup. The new device would be considered an entry-level handset and while it might not match the exact specifications and performance of original iPhones, it would no doubt match the requirements and specifications of other entry-level devices running on Android and Windows 8.

Apple’s Senior Vice President of Worldwide Marketing, Phil Schiller, recently told a Chinese newspaper that the rumors of a cheaper iPhone are not true. Schiller steadfastly insisted that Apple would never produce a smartphone that didn’t feature the best technology available. He pointed to the company’s consistent use of unibody designs, the new Retina display, and even quality product pipelines as an indication that Apple has no desire to produce a cheaper smartphone.

There are two problems with this denial however. First off, Schiller’s comments leave room for interpretation. He clearly stated the company would not produce -cheap smartphones.- Cheap is often associated with second-tier or inferior products, when in reality it can mean a less-expensive alternative for consumers as well.

Secondly, given Apple’s dip in market share and waning demand for the iPhone 5, it might not be a bad time for Apple to diversify its line to win back some customers with the strong performance of the iOS system at a price that is affordable to more consumers.

Many Android Users Switch to Iphone X

The emergence of iPhone X in the gadget market seized much attention not only from iOS loyal users, but also Android. According to analyst reports, the transfer rate from Android to iOS increased after the iPhone X debut.

Uncovered from Softpedia on Wednesday (27/12/2017), analyst from Morgan Stanley, Katy Huberty claimed the migration rate from Android to iOS has increased from 6.7 percent in October 2017 to 9.2 percent after the iPhone X slid. He considered the iPhone X adoption is better than the iPhone 8 and 8 Plus is actually not surprising.

Mirisnya, sales of both models are affected because of the presence of the iPhone X which became a “rival” strong. This is most likely due to a number of features such as Face ID, Animoji and OLED screen owned by iPhone X.

“Additional data shows the adoption of iPhone X in China faster than the iPhone 8 and 8 Plus.In spite of the faster penetration of the iPhone X versus 8 and 8 Plus, we believe there is a significant pent-up demand from the old iPhone owner base (more than 2 years ), “said Huberty.

iPhone X was released simultaneously with the iPhone 8 and 8 Plus in September 2017. iPhone X not only became the most expensive smartphone Apple ever sold, but its presence at once to celebrate 10 years of “birth” iPhone.

Key Success Factors In Information Technology Job Search

Online Job Search sites are soaring, especially during the recession and one place you will note that has many jobs available is in the world of information technology. Today there are also sites specific to the IT industry where IT engineers and managers can place their resume online and offer contract labor.

Information technology jobs are always available, particularly if your skills are generalized. Many of the job search sites offer jobs in specialized fields and focus on one to more areas of information technology while others are more general.

Most of these sites will require you to register with them. And it is a good idea to register with all of them unless you find some sites repeat the same jobs you have see on other website. It is a good idea to have the sites bookmarked in a special folder as well as noting your login, email and password details in a word document or your day planner. Have both an electronic and hard copy record of this data in case your burn your paper or crash your computer.

However it remains that with so much unemployment competition is also high and getting that extra edge is critical to your success. Job search sites will allow users the option to post their resume where prospective employers can search at anytime. This can be done whether or not a person found a position he or she is interested in. In this case you want to have your pdf version as well as a recent photo of yourself in jpg from so you can load them up to the site. Here is a hot tip. If you are able to load several photos, have one of you working on the job with a computer or network server. This links you to IT in the mind of the perspective employer. It will also be more memorable that just a mug shot. If you put in the mind of your perspective employer the image of you working on the job it is easier for them to see you working on their job.

Frustration often sets in with job search whether off or online. is high when it comes to unemployment and job search. Searching through numerous IT jobs on the Internet can be aggravating. However, five major points can help ease the stress. Know your bottom line. Are you prepared to relocate, are you prepared to take a salary cut and what is the lowest you will go, are you prepared to work in a different industry than previously? Once you know all of these answers you can refine your search more so you do not end up taking any old information technology job out of desperation.

If you are feeling a little desperate, consider going for a short term contract rather than a job itself. In the world of information technology many companies are outsourcing and taking on contractors before they hire them. This will help you in two ways. Firstly you get to have your economic needs met while looking for the perfect job. Secondly the contract itself may lead to a longer contract or full time employment. While contract work doe not come with all the fringe benefits of a full time job, it pays considerably more so be sure if you take this option to put some money aside in unemployment insurance, medical and dental etc.

One last hot tip to give you that added edge, make sure every aspect of your presentation from resume to appearance is pristine clean and methodical. Information technology jobs require accuracy. If you have mistakes in your resume or look a little scruffy you will not emulate the sense of accuracy to your perspective employer. We all know sometimes the best qualified do not get the best job over the better looking candidate. And that has nothing to do with looks so much as overall appearance and tone of the way you look. If you are in the market for an IT job, all the very best and success to you. Remember, contracts are easier to come by if you find yourself looking a little too long for comfort.

Solar Technology Discover Ways To Have Great Results To Suit Your Needs

Despite plentiful products of power in the United States, power charges seem to continue soaring. A good way to cancel out the more costs is by using solar powered energy within our properties whenever you can. There are some valuable suggestions in this article which will help you benefit from the sun’s power as much as possible.

Think about back-up energy solution, if you happen to have trouble along with your solar panels. Generators are a wonderful idea, however you may also stay connected to a main grid to be able to access energy when necessary. Should you opt for a electrical generator, make certain that is properly working by carrying out routine maintenance one or more times a month.Be mindful when placement solar panels on your property. These individual panels will need sunshine, no less than throughout the primary area of the working day. If there are tons of bushes that color the panel, you’ll lower your all round result by a lot. Prepare yourself and look at all of your current position choices.

Should you be an entrepreneur and also you are thinking of changing your power program over to alternative solar powered energy, see if you can get any taxation reductions for accomplishing this. Sometimes govt entities will give you benefits to firms who agree to transition to your much more natural power source.

Just before acquiring any solar panels, make certain they are state licensed. This might appear to be a compact deal, but it really affects your profits. Lots of the authorities refund courses call for that your solar energy panels are govt qualified. Should they aren’t, you’ll be missing out on a number of the funds again prospects out there to suit your needs.When planning your sections, take into consideration the shadows that near by trees and shrubs could pass on the location. Solar energy panels normally should be attached high in the roofing, within a area that is subjected to direct sunlight to the greatest length of time. However, what seems like a great spot may be included in shade for a specific period of time during the day.

Figure out how geography elements in the price advantage evaluation of solar power panels. A couple of things really need to be taken into account. First, your world-wide latitude and extended distance from your equator figure out your sunlight amounts and position. Next, your nearby and govt authorities come into enjoy also, offered any rebates or rewards they could offer. The two of these should be factored numerically in determining if solar energy panels are likely to even make or cut costs for you.

There are additional sites exactly where solar panels might be set up aside from the roofing. There are greater options if you possess the place. Mounts which move allow you to placement the individual panels successfully. Nonetheless, it will require some space. Don’t allow the first retailer you holiday to convince you that their solar energy panels are the most effective. It may look that solar cells are usually the same wherever you go, but there is however actually a significant difference throughout the market and it’s easy to miss out on the key data. Focus on wattage, dimension, and expense on every choice.

When you need to visit directly to the cause of potential in our galaxy, sunlight is the place to locate it. The valuable hints you’ve go through on this page are a fantastic start off. Keep looking at content and blogs and forums and discovering all you are able to perfect the skill of using solar energy for your very own benefit.

Panel PC solutions from Blue Chip Technology

Blue Chip Technology are one of the UK’s leading designers and producers of single board computer platforms and panel PCs. Blue Chip’s single board computer solutions will bring the power of the processor to your business.

Article
Blue Chip Technology is one of the UK’s leading designers and manufacturers of industrial computer platforms and panel PCs. With an outstanding portfolio Blue Chip Technology provide off-the-shelf products including COM boards, single board computers (SBCs), fanless embedded systems, rackmount computers, Panel PCs and digital signage hardware.
Blue Chip Technology have a track record of working with a range of industries including hospitals, assembly lines, rail networks and laboratories both in the UK and across the globe.

Single Board Computers and Panel PCs
Single board computers are entire computers built on a single circuit board. They are most commonly used for industrial purposes, often in situations where smaller, more power-efficient and reliable computers are needed.
A panel PC is a type of industrial computer. A display, usually an LCD (liquid crystal display) is integrated into the motherboard and electronics. Panel PCs range from lower cost types with no environmental sealing to the more expensive, heavy duty models which may be waterproof or even explosion proof. Panel PCs can also be custom designed and built to the requirements and budget of the customer.
The technical experts at Blue Chip Technology have designed and manufactured a wide range of display based solutions to suited to Human Machine Interface (HMI), SCADA, process control, factory automation, building control and home automation applications. The Alpha Panel PC range of 8.4 to 17 inch range of industrial all-in-one units – compact, highly integrated, network-ready devices with full I/O connectivity. The Alpha Panel PC range is IP65/NEMA4 rated and designed to be housed in a panel or enclosure creating a dust and waterproof barrier, an essential requirement for many industrial and commercial applications.

Custom Design
Blue Chip Technology also offer custom design products which are designed and manufactured in-house. As industry leading specialists Blue Chip Technology can either make minor changes to existing products to meet specific needs or can build the products from ground-up development.
Blue Chip excels in custom design  because design and manufacture are done in house they are flexible enough to accommodate a small adaptation or bottom up design project. What it doesnt necessarily mean is ramping up extra costs  Blue Chip Technology regard many customisation services as integral to the product offering and are happy to provide free of charge.
For more information on the Blue Chip Technology products and services please call today to speak to one of our specialists  01829 772 000.

Old Fashioned Cordless Phones Vs. New Dect Technology Phones

New styles of cordless phones, like DECT phones offer new features and more static free audio than that of older cordless phones. DECT phones are pretty much the latest technology in cordless phones.

DECT phones are gaining popularity in homes that are using a land line telephone service. Phones today offer more functionality; for instance the DECT has a base station, similar to all cordless phones. However, DECT phones expansion to other DECT phones in the house. With these phones, you can add other handheld, wireless phones to the base. Furthermore, other DECT phones can be purchased for the home and family members can speak to each other in the home on DECT phones – just like a walkie talkie would work. Also, the range with DECT phones has increased over the years to allow users to travel further distances while they use their DECT phones. These new phones use a different frequency that makes the call as clear and as crisp as being in the same room as the person you are talking to. The cause of the better clarity is the higher band frequency that is very reliable and not subject to interference from other things that use radio frequencies like baby monitors or wireless personal networks.

Cordless phones are reasonable in price these days because of more cellphone users. Howeverwith the presence of DECT phones, cordless phone sales are insignificant. DECT phones come in many different designs like digital numbers and way more functionality and capabilities than regular phones. DECT phonescan usually give access to email, a very crisp sound, and robust video capabilities. Additionally, DECT phones can give users as much as 24 hours of actual conversation on one battery charge. Other cordless phones can go up to 5 if you’re lucky DECT phones come with a plethora of voice mail and talking features that make it an all in one base of communication. DECT phones can also be used for office level communications and can be installed over an already existing computer and telephony system.

The many features and functions make a DECT phone a much smarter purchase than a cordless phone. As technology grows, DECT phone manufactures find things to build upon to add even more tools and services. Nowadays, there are many brands of DECT phones, and so, there is a wide range in price. The cost depends on the design, and additional audio/video capabilities of the DECT phone. As always, the more higher-end brands tend to be higher in price. Also, cost depends onthe type of DECT phone. As aforementioned, there are DECT phones out there for corporate sized telecommunication needs; these DECT phones are much more expensive because of the added functionality and ability.

Led Lights The History Of This Emerging Technology

Light-emitting diodes (LEDs) were an accidental discovery at first. At the beginning of the 20th century, it was discovered that when electricity was applied to the semiconductor Silicon Carbide (SiC) it produced a light. This light was too dim to be of any use so the research was never distributed. This could have been the end for the LED, but it wasnt content to die out.

Nearly 20 years later Russian and German scientists revisited the idea of light produced this way. The light was still of such poor luminance that the idea nearly died again. A report published in 1936, which helped to invent the term electroluminescence, revived the research for light from this source. The science of electroluminescence languished in obscurity for a while. It began to gain favor again in the 1950s when some British scientists started experimenting with it again. This led to the first infrared LED. From this technology came the first visible spectrum LED, in red, from Gallium Phosphide (GaP).

This was the start of the LED revolution. From that point each decade brought advances in the technology of light-emitting diodes. The use of different substrates brought brighter lights of different colors. The colors advanced from red to orange and on to pale green, then yellow and on to a brighter green. By the 1990s the use of Gallium Nitride helped usher in the era of blue LEDs. These blue lights became the basis for white light. The use of fluorescent phosphors helped change that blue light into high intensity white lights. Now LEDs can be found in almost every visible color of light.

This technology has led to additional uses for the LED as well. Due to their low light output they started out in indicator lights and display light applications only. The cost of materials was an issue at first and, therefore, they were used only in expensive laboratory and test equipment. They later began to be used in appliances, calculators and watches. The advent of additional colors increased their use in displays. They could be used in signs and digital display equipment.

The first LED flat panel television prototype was produced in 1977, by James P. Mitchell. This prototype was a red, monochromatic display. Later, in the 1990s, low-cost, efficient blue LEDs emerged moving this use along. Once a full spectrum of colors was realized in the late 1990s the flat panel LED television became a fully functional and popular option.

As the LED technology advanced and the luminescence increased, the uses for LEDs increased. LEDs began popping up in devices used to illuminate areas. Flashlights, landscape lighting, and other lighting sources became popular. Emergency lights began to use this technology. Traffic lights were replaced with LEDs. Interior lighting and headlights in vehicles became a common home for these lights, as well. As the cost of producing the lights decreased, and the availability of colors and brightness increased, the uses exploded.

From an accidental discovery to a common household name, the history of LEDs is a long one. The early discovery and limited uses of the light-emitting diode did not show much promise. Very few early researchers would probably have predicted the many, varied uses for this technology. The LED certainly earned its prominent spot in todays society.

~Ben Anton, 2007

Short Process Of Powder Metallurgy Technology

Technology of powder metallurgy parts near net shape powder metallurgy workers has long been one focus of the study subjects. Over the past decade, the study of new technology, new technology after another. These new technologies, the emergence of new technology to solve the short-flow low-cost powder metallurgy materials forming problems, greatly contributed to the rapid development of powder metallurgy parts. Currently, powder metallurgy parts manufacturing technology development is to increase density, reduce costs and complexity of high-precision near net shape parts mouth.
In 2000, Germany’s Fraunhofer Institute has developed one of these are known as the flow temperature and pressure of the short process of low-cost near-net shape technology. The temperature and pressure process technology-based and combines the advantages of metal injection molding technology. By improving the mobility of mixed powders, filling ability and formability, can 😯 ~ 130 , in the traditional press on the precision forming of parts with complex geometries, such as the vertical direction with a groove with the suppression of the hole and threaded hole and other parts. 2 without the need for subsequent machining. Flow temperature and pressure forming technology not only to overcome the traditional powder metallurgy forming a complex geometry in the gaps, but also avoid the high cost of metal injection molding technology is a great potential of new technology, has a very broad application prospects.
Flow temperature and pressure forming a new type of powder metallurgy parts, as near net shape technology, its main features can be summarized as follows: 1) forming parts with complex geometry flow using temperature and pressure can be directly formed with grooves perpendicular to the direction of repression, holes and screw holes and other parts, while the use of the shape of the cold manufacture of such parts is very difficult or even impossible, manganese powder the general need to complete the subsequent machining, CNC press to realize that the use of complex and precise movements , can only produce a relatively simple type of parts. Fraunhofer researchers used a special mold, the T-hole, hole, L-shaped cavity mold hole has been studied and successfully prepared a T-shaped parts. The results show that the well-mixed powder flow is sufficient to avoid cracks in the corner. Fraunhofer researchers have also used the shape with a slight taper to successfully direct the punch forming a deep blind hole parts, blind holes and wall thickness of the high rate of up to 3 to 7, the changes in wall thickness in the range of 1 ~ 3mm . Flow temperature and pressure can also be precision ground forming threaded holes. With the external thread of the bolt with a core mold after compaction, it will tighten the bolt out from the semi-finished products, and then sintering can be obtained thread. According to shrinkage by selecting the appropriate core diameter of the bolt thread can be suppressed without the required 2 machining.
2) The compacts of high density, density, temperature and pressure than the uniform flow of powder loading density as high, so after the semi-finished products by the temperature and pressure can reach very high density values. In addition to density, the powder flowability as well, forming parts and more uniform density. Or use a simple model red (no auxiliary floating red multi-axis model) can be multi-step forming of powder metallurgy parts.
3) the adaptability of materials Fraunhofer researchers conducted a variety of metal powder flow of warm compaction studies, have made a more significant results, including low alloy steel powder (Distolay AE), stainless steel 316L powder, silicon powder pure Ti powder and WC-Co hard metal powder. Flow temperature and pressure process in principle applicable to all the powder system, the only requirement is that the powder sintering must be good enough to eventually reach the required density and performance.
4) to simplify the process, reducing costs forming parts using conventional powder metallurgy method to suppress in the direction perpendicular to the grooves, cross holes and other shape, need to design very complex molds or 2 times after sintering machining to complete. Although injection molding technology in the shape of forming part of the complex and almost without any restrictions. However, due to large number of added binder, nickel powder in the heating process in part because of the influence of gravity to deform. Therefore, it often requires an additional more complicated and more expensive binder removal process, making the injection molding of high cost than conventional powder metallurgy technology, so the injection molding of parts may not be able to meet its design features to replace the conventional powder metallurgy parts to the application of injection molding technology has been somewhat restricted.
The flow temperature and pressure forming technology, either directly without the need for complex geometries 2 subsequent machining; the other hand, the flow temperature and pressure forming process, the use of a special binder and lubricant content is moderate, the configuration of the hybrid powder has a high viscosity and critical shear strength, the heating process does not occur in the deformation, which can be directly removed during sintering binder. Thus, the traditional powder forming process and injection molding process compared to current techniques for temperature and pressure forming of complex geometry parts, the only simplifies the production process, but also significantly reduces manufacturing costs.

Peps Mattress Reviews Mattress Technology & Certifications

This is a review about Peps Mattresses, the technology used, the quality standards and products. The article also talks about the partnership with Restonic Mattress and the review of quality standards met by Peps. The Peps sleep solutions also meet the benchmark defined by Restonic Corporation, USA for its Restonic range of products.

The technology is patented and unique delivered in its product range. Some of the features of the products include: individually pocketed inner springs that absorbs weight and compress independently, so that you will feel your partners movement a lot, less. The reinforcement in the middle helps reduce the back strain significantly. The restonic range of mattress includes the normal top range, euro top range and the pillow top range.

The Peps mattress is certified by Entomology Center Cambridge, under AATCC 147/30/1424 standards. The Peps range of products is crafted from materials and components of highest quality standards and certifications. The products are delivered with care to exceed the customer expectations. The mattress is internationally certified for no odor, no fungus, no dust mite & no bacteria.

The manufacturing facility is built in a 15 acre industrial campus in Coimbatore. The world class manufacturing facility comprises machineries from Germany, Sweden and USA. Peps is Indias only manufacturer of sleep systems that match exact quality and technology benchmarks of Restonic Corporation of USA. Peps unique expertise and insights of Indian consumer strengthen an already formidable partnership.

A brief review about the quality of materials used: the high carbon tempered steel wire is used to inter connect & form rigid, durable & yet flexible core. The secure lock feature reduces motion transference and partner disturbance. The super edge feature binds the perimeter making it stronger and increasing the sleeping surface. The Belgian outer quilt & damask knitted ticking makes the first feel of great experience. The five zone sleep system makes provides special support to head, neck, shoulder, back and calf body areas.

The buying tips for mattresses:
Select a mattress
Lie down in your sleep position
Carefully observe and evaluate the level of comfort and support
Educate yourself about each selection
Partners should try each mattress together for a better evaluation.

Copyright 2011 Peps Industries Pvt Ltd. All rights reserved.

Older posts

© 2018 mobile-log.info

Theme by Anders NorenUp ↑